Primary responsibility
- Support production for product yield and quality improvement in electrical aspect
- Support product re-engineering and design improvement in electrical aspect
- Support NPI/CPI and product transfer activities

If you met the above requirements, please submit your resume to career_advisor@resumeweassist.com ASAP.

Good luck!!!

Good luck.

…………………………………………………………………………………………………………………………………………………………….

Reporting Relationship:

Operational Report : Senior Director & General Manager

Functional Reporting: Quality Manager

Job coverage:

1. Factories : Hong Kong, China, Malaysia, Philippines
2. Subcontracted manufacturing : China, Philippines, Malaysia
3. Key BOM Suppliers

Key Areas of responsibility:

1. Collaborate with Corporate and Business Unit Quality Departments to develop and enhance comprehensive quality strategy, policies and programs, key metrics, reporting methods and standards, processes, goal setting, organizational approaches and customer satisfaction.

2. Complete ownership and bottom line accountability for the entire quality function within the organization.

3. Define key metrics for reporting, monitoring and management of quality related initiatives throughout the company.

4. Identify and make recommendations for processes and organizational changes, related to quality control that lead to measurable improvements in quality, cost, and other variables.

5. Work with internal stake holders to drive continual improvement.

6. Implements policies, procedures, processes and corrective actions that define and guide quality assurance of products produced at subcontracted facilities and by external suppliers.

7. Set quality standards and ensure that end control processes are in place through functional leadership of different site quality teams.

8. Oversee various quality audits including certification, key BOM suppliers and customer audits , customer complaints, quality documentation, processes etc to ensure compliance initiatives and requirements are achieved.

Personnel Specifications:

1. Malaysian

2. University education or above in an engineering science.

3. Not less than 10 years in a senior level, quality focused position in an industrial manufacturing or related environment context. Semiconductor industry is preferred but not essential. Can be considered as Senior Manager for the candidate with less working experience.

4. Must be familiar with and have demonstrated success in leading a quality organisation in a multi-culture environment

5. Exhibits character with positive attitudes, strong leadership skills as well as an outstanding communicator.

6. Have proven track record of effectively working with customers and partners relating to all aspects of the manufacturing process and product quality.

A multinational company in Selangor, Malaysia is actively looking for a Process Engineer specialized in Semiconductor Die Bonding process. If you are a Malaysian with the following experience and willing to venture into a more challenging responsibilities, please submit your resume to career_advisor@resumeweassist.com. We will work with your future employer to access your suitability for an interview.

Responsibilities:

• Statistically control the process and ensure 6 sigma quality.

• Maintain all dam and fill process documents and ensure ZERO audit failure.

• Lead process improvement and optimization in terms of yield and output.

• Work with GAO to qualify new substrate/compound & fan out across packages.

• Manage manufacturing day to day lots disposition.

• Manage process capability/robustness improvement.

• Achieve yield of 99.7% process yield for die bond process.

Requirements:

• Bachelors degree in Electrical & Electronics or Mechanical and/or Materials Engineering discipline, preferably with min 1 years of relevant working experience.

• Experience in semiconductor assembly and applied statistics will be an advantage.

• Have good leadership skills and able to drive the die bond team.

• Strong interpersonal and communication skills.

• Good decision making / problem solving skills.

• Willing to work hard.

Great opportunities for engineers to start or expand their career in Bayan Lepas, Penang, Malaysia. Open to Malaysian only. If you are interested to apply any of these listed jobs, please send me your resume to career_advisor@resumeweassist.com. We will work with your future employer to assess your suitability for an interview.

Good luck!

………………………………………………………………………………………………………………….

1) R&D Digital Design Senior/Engineers

Responsibilities:

Responsible for the architecture, design and development of embedded digital

systems that include microprocessors and memory sub-systems, CPLDs,

FPGAs, and other standards-based protocols such as PCI-X.

Deliver prototype hardware to customers by implementing physical hardware

designs by selecting components, capturing schematics, and supervising PCB

layouts.

Develop hardware design verification test plans and perform verification of

prototype hardware per requirements specifications.

Use EDA tools such as Cadence Concept and SpecctraQuest, Chronology

Timing Designer, Mentor Graphics DxDesigner and ModelSim.

Requirements:

Bachelor/Master Degree in Electronics & Electrical Engineering with a minimum

of 2 years experience in structured hardware design

2) Product Development Project Manager

Responsibilities:

Responsible for creation of the project proposal, which includes the project plan, schedule, budget to meet customer expectations.

Manages customer expectations in regards to team performance, deliverables,

and schedules to ensure successful project and customer satisfaction.

Responsible for the selection, and ultimate performance, of third party suppliers

and sub-contractors required to execute the project plan.

Requirements:

Masters/Degree in Electrical Engineering with minimum 8 years working experience in an electrical development and project management environment

Must have electronic or software development experience

Applicants should be Malaysian citizens or hold relevant residence status.

3) Staff/ Senior Embedded Software Engineer

Responsibilities:

Responsible for the architecture and design of software that will control embedded products using Intel x86, Motorola PowerPC, and other RISC-based processors that range from 8-bits to 32-bits.

Responsible for conceiving, designing, developing and testing of customize products for global market, from as early as function creation to product initiation and finally to product realization.

Design and develop the software solution based on the customers’ specification.

Define and implement best software development processes and software quality assurance.

Carry out research assignments and drawing-up customer’s Software User Requirement specifications.

Finalizes the software design specifications, develop the software solution and tests the designed modules.

Develop and execute software design verification test plans per requirements specifications to ensure software releases meet design requirements

Maintain and deliver controlled software releases to customers by utilizing appropriate configuration management tools

Support other functional groups as required.

Support transition to manufacturing.

Requirements:

Bachelor/Master Degree in Electrical Engineering, Computer Engineering or Computer Science

Minimum of 7 years’ software development experience in the medical, computer and/or industrial projects

Proficient in software program languages which includes ASM, C/C++/C#, JAVA, UML and .NET.

Familiar with real-time operating systems such as VxWorks, pSOS, Linux, and WinCE as well as creating custom real-time schedulers.

Experience in using Rational Rose, Rational ClearCase, and Rational ClearQuest will be an added advantage

Familiar with SEI CMM reference models software process

Applicants should be Malaysian citizens or hold relevant residence status.

4) Senior/ Analog Design Engineer

Responsibilities:

Responsible in design and development of analog systems and interfaces that include power supplies, distributed power systems, mechanism and motor control, sensor interfaces, small signal conditioning and RF.

Conduct feasibility studies on the design of industrial, telecommunication or medical products and communicate issues regarding the feasibility of such design constraints within the project team.

Finalize the design specifications, implement the design and verify the designed hardware. Use EDA tools such as Cadence Concept, Cadence PSPICE, Mathworks MatLab, and Mathsoft MathCad.

Requirements:

Bachelor/Master Degree in Electronics & Electrical Engineering with a minimum of 2 years experience in structured hardware design

Strong analytical skills with a good knowledge of electronic components and systems

Applicants should be Malaysian citizens or hold relevant residence status.

JOB DESCRIPTION

Do your career goals aim at R&D with the leading edge wireless technology? Want to go further by seeing how your innovation is put to use by customers? Here is where you take the next step to work with a young, dynamic team in Penang, Malaysia in developing world-leading wireless telecommunications test solutions.

The incumbent become a member of the Wireless Systems Solution R&D Department in developing the Standard Design verification, Conformance, Application SW and new Test platform for the Wireless test & measurement market.

He or She will be responsible in developing the Test System, the application SW and Test Executive comply to Product Life Cycle requirement

He or She will liaise with the NPI team to ensure all R&D project are released and ramped up meeting the schedule.

He or She will be responsible to employ their software experience to design 2/3G and LTE Conformance test solutions in compliance with 3GPP 34.121 and 36.521 RF conformance specifications.

He or She interfaces with customers and suppliers on technically related matters.

JOB REQUIREMENT

BSEE or equivalent combination of education and experience.

Ability to work as part of a team to develop and implement successful strategies focusing on the Wireless industry.

High degree of creative ability, strong interpersonal skills, strong written and oral communication skills,

Minimum 5-yrs experience.

Experience in measurement instruments applications.

Experience in software development for test instruments (Spectrum Analyzer, Signal Source, Wireless Test Set) and system automation.

Experience in software development for telecommunication system, GSM/GPRS/EGPRS, CDMA/1xEVDO, WCDMA/HSDPA would be an added advantage.

Strong programming skills in Visual Basic, C++, C# or .net.

Familiarity with Microsoft Windows, Microsoft.net technologies.

Experience in telecommunication protocol knowledge (WCDMA, GSM/GPRS) would be an added advantage

Written and Oral English Skills

If you are interested to apply for this job, please send me your resume to career_advisor@resumeweassist.com. We will work with your future employer to assess your suitability for an interview.

Good luck!

Responsible for: electrical shift operations.

1) Ensure the continuous operations of equipment supporting electrical systems  

    per set standards .

2) Continuous improvement on equipment or system operations.

3) Ensure compliance to regulatory requirements.

4) Support activities for Predictive, Preventive and Corrective Maintenance

    programme. 

5) Provide effective cost reduction solutions.

6) 5S+1S in system operation

7) Diploma in related field

Manager for Facilities (Electrical Systems)

Main duties and Responsibilities as follows:

1) Ensure zero failure on power supply to AT (Assembly and Test) manufacturing.  

2) Manage and Lead electrical team and group of contractors in maintenance for   

    operations support

3) Continuous improvement on equipment or system operations.

4) Ensure compliance to regulatory requirements.

5) Involved in planning & costing for the best solutions.

6) Plan and review the Predictive, Preventive and Corrective Maintenance

    programme and activities for safe, effective and efficient electrical system

    operations. 

7) Degree/Master in related field

HVAC (Engineer)

Main duties and Responsibilities as follows:

1) Ensure zero failure of air conditioning supply to AT (Assembly and Test)

    manufacturing.  

2) Lead air conditioning team and group of contractors maintenance for operation

    support

3) Continuous improving on equipment or system operations

4) Involved in planning HVAC systems/Chillers, costing for space project .

5) To plan and review the Predictive, Preventive and Corrective Maintenance

     programme and activities for safe, effective and efficient of HVAC system

     operation. 

6) Provide technical solution in solving daily quality issue.

7) 5S+1S in system operation

8) Degree in related field

Engineer

Main duties and Responsibilities as follows:

1) SAP system support

2) Budget expense planning & control, cost analysis, capital planning and cost  

    reduction activities

3) Manage utility reduction programs throughout factory

4) Governance and asset control

5) 5S+1S in system operation

6) Degree in related field

Industrial Nurse

Main duties and Responsibilities as follows:

1) Management of in-house clinic inclusive of 24×7 SRN coverage, visiting   

    medical officer schedules, pharmaceutical billings and cost improvement 

2) Review of medical bills and in house clinic running costs, 

3) Occupational Injury & Illness medical case management, inclusive reporting of  

    I&I case,

4) Pre-placement medical examination and required medical surveillance  

    programs, biological / health effects monitoring and wellness promotion

    programs

5) Maintains accurate confidential information in accordance with local govt.  

    regulations and HR policies.

6) Diploma/Degree in Nursing Education

If you are interested to apply any of the above jobs, please drop your resume via e-mail career_advisor@resumeweassist.com . We will work with your future employer on your suitability for an interview.

Good luck!

Location: Pahang

Job location: Across Malaysia

      Role –Business Development Manager –

• Will report directly to MD with a dotted line to a Global Sales Director based in the US.
• Will work as part of a team including US, UK and China.
• Role is to focus almost totally on internal sales to Malaysia / Singapore.
• Must be Malaysian and Malaysian based – most likely in Penang or Johor Bahru.
• Must know the internal market. This is the key focus.
• Education. Degree / Masters. Decent background.
•  English must be excellent – first class communicator. (And of course      Bahasa Malaysia).
• Has to have experience in the EMS industry in Malaysia / Singapore.
•  Role will include a car and a housing allowance as well as the usual benefits. (i.e. 13 month etc..). A separate sales bonus is also a possibility but this needs to be determined.
• This role will get a lot of focus from TT group. It will certainly be in the spotlight.

If you interested to apply this job, please send your resume to career_advisor@resumeweassist.com. We will work with your future employer to assess your suitability for an interview.

Good luck!!

1) Guru Bahasa Malaysia – mengajar subjek BM Darjah 1- Ting 5 (dua orang)

2) Guru Bahasa Inggeris – mengajar subjek `English’ Darjah 1- Ting 5 (dua orang)

3) Guru Sains – untuk mengajar subjek Sains tingkatan 4 & 5 (seorang)

4) Guru agama – mengajar kelas al-Quran, kelas KAFA & bhs Arab (2 orang)

Tarikh tutup: 25 November 2008

Berminat hubungi : 012 – 459 3084 / 017 – 499 2872 (SAMSURI)
Alamat: Pusat Tuisyen Akhiar
40-1 (Tingkat 1), Lebuh Sungai Pinang 1,
11600 Georgetown Pulau Pinang.

Those with Degree in Engineering (Semiconductor Technology, Microelectronics, Material Science, Applied Science or Electrical & Electronics/Chemical Engineering) and minimum 2 years experience in wire bonding process are highly encourage to send your resume to career_advisor@resumeweassist.com. They are also looking for a team player with good problem-solving skills with knowledge in 6 sigma Green/Black Belt implementation. Added knowledge on Leadframe/ CU Wire bonding will be an advantage.

We at ResumeWeAssist.com will work with your future employer to access your suitability for an interview.

Good luck!